Home / News (Page 9)

  • Possible Problems and Solutions When Using 3-Axis Robots-Part one

    Problem: Fail to suck products occasionally Reason 1: The air pipe is folded,the air can not go through. Solution: Dredge the pipe, or replace the damaged pipe. Reason 2: The air pipe or pipe connector is leaking air. Solution: Replace the air pipe o...

  • Tips on Expanding the Lifespan of Injection Molding Machine Robots

    No matter what we want, we expect longer lifetime, less trouble. Let's take our cell phone as an example, while using it, we expect longer lifetime, less battery consumption and faster speed. Believe that regardless of the robot or injection molding ...

  • Research and Application of Injection Molding Machine Robots

    With the development of China's plastics industry, the annual growth rate of China's plastics machinery industry in recent years is about 30% profit growth is also much higher than the growth of industrial output value, China's machinery industry has...

  • The Application of Injection Molding Machine Robots in the Plastic Injection Industry

    With the rapid development of plastic processing industry in China, injection molding machine robot automation is getting more and more popular. Modern injection molding machines are often equipped with robots to improve production efficiency. The in...

  • Benefits of Injection Molding Machine Robots

    Firstly, robot can fix the whole cycle time. If the plasticizing time, injection time, holding time, cooling time and switch mold time are the same, the yield can be improved. Also, factories can arrange production according to this time schedule. Se...

  • Useful Tips When Injection Molding Machine Robots Having a Problem

    1. The signal of "Robot arms move up" appears abnormally Tips and solution: Check if the wires are loose,check if sensory switch is working normally. 2. Proximity switch is too far away from sensory metal Tips and solution: Adjust the distance betwee...

  • Tips on Swing Arm Robots Maintenance

    1. WATCH THE ROBOT CYCLE One of the keys to keeping swing arm robots in good condition involves simply watching and listening, which can reveal a lot about the robot's general condition. As the robot runs through its motions, listen for any unusual s...

  • What Should be Noticed When Installing Hot Runner?

    Precautions for hot runner installation: 1. Place the mold, lay the upper mold flat, and clean all the holes and templates with the air gun. 2. Check the size of each hole, focus on the depth and remove burrs on the template. At the same time, check ...

Contact Us